Expert Answers about Lincoln Trailer Hitch Ball Mount

• What is the Purpose of a Trailer Hitch Ball, Trailer Hitch Pin, and a Clip and are All Necessary
• A hitch ball and a hitch pin and clip each serve a different purpose. A hitch ball, like # 19247, attaches to the ball mount, like # C45010, using a large nut that threads on from the bottom, kind of like a nut and bolt. This ball is what the trailer coupler attaches to. The hitch pin like # PC3 goes through the ball mount and the trailer hitch and the clip keeps it from coming out while traveling. There are also locking hitch pins that use a lock and not a clip like # e98880. Basically,...
  view full answer...


• Is etrailer Ball Mount Kit 989891 Matte Black Like Trailer Hitch e98850
• The etrailer Ball Mount Kit for 2" Hitches # 989891 does not have the same matte black powder coat finish as the etrailer Trailer Hitch Receiver # e98850. The ball mount is a bit glossier so they aren't a perfect match but it will be pretty difficult to tell the hitch and ball mount apart unless someone is really trying to find a difference. The ball mount kit is an exceptional value because it includes a ball mount with 3/4" rise or 2" drop, a pair of hitch balls (2" and 1-7/8"), a pin...
  view full answer...


• How to Select Correct Ball Mount and Hitch Ball for 2017 Porsche Macan
• If you are installing the Curt Trailer Hitch # C13136 or the Draw-Tite Trailer Hitch # 75940 on your 2017 Porsche Macan and plan on towing, you will need to take some very simple measurements in order to find out the correct ball mount. First, make sure both your Porsche and trailer are parked on level ground; you'll then want to measure from the ground to the top of the inside of your hitch receiver. Next, measure from the ground to the bottom of your trailer's coupler and find the difference...
  view full answer...


• Is Aluminum Ball Mount Compatible With Stainless Steel Hitch Ball For 2 Inch Hitch
• Yes, you can absolutely use an aluminum ball mount with a stainless steel hitch ball without worry of the ball mount corroding. In fact, there are no aluminum hitch balls so manufacturers suggest the use of stainless steel as it is going to be the best option work in conjunction with an aluminum ball mount. So what you will need depends on the rise or drop your trailer requires: - 1" Rise, 2" Drop: Curt Ball Mount for 2" Hitches # C74WR - 3" Rise, 4" Drop: Curt Ball Mount for 2" Hitches...
  view full answer...


• Anti-Rattle For Curt Multi-Ball Adjustable Ball Mount
• There aren't anti-rattle hitch pins for the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900 because anti-rattle pins are for hollow shank style mounts. There is an anti-rattle bolt on the # D900 mount, but if there is a lot of rattle in the hitch, there is an option to minimize it greatly with a clamp-style option: - Roadmaster Quiet Hitch for 2" Trailer Hitches # RM-061 The # RM-061 will tighten the ball mount in the hitch and reduce any movement, which is going to...
  view full answer...


• Does Trailer Hitch Receiver for 2020 Tesla Model X Have Restriction on Rise or Drop
• There is not a restriction associated with a ball mount's rise or drop for the Draw-Tite Trailer Hitch Receiver # 76143 that fits your 2020 Tesla Model X. For a ball mount the one with the most rise we offer is the Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop # AMSC12. For 1-7/8" or 2" hitch balls with this mount you'll need the Convert-A-Ball Interchangeable Ball Set # 901b; for a 2-5/16" hitch ball you'll need part # C40007. And for a hitch lock to secure the mount...
  view full answer...


• What is a Drawbar and Why Would I Need One?
• The hitch drawbar or ball mount is the part that slides into the hitch receiver that has the trailer ball bolted to it. You'll need the ball mount if you plan on towing, but if you're only using the hitch as a mount for a hitch mounted accessory like a bike rack or cargo carrier, you won't need it. If you need a ball mount that's compatible with the Curt Class I hitch, part # C11256, I'd recommend # 3592. For 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. For a trailer...
  view full answer...


• Does Longer Ball Mount With 3/4 Inch Rise for Class II 1-1/4 Inch Trailer Hitch Affect Towing
• You can absolutely use a ball mount longer than your current which is 5 inches long and there will not be any type of negative affect on your towing. We do have ball mounts that will work with a Class II, 1-1/4 inch trailer hitch and that have the right amount of rise for you: - 7" Long: Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop # 36051 - 9-3/4" Long: Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop # 36053 Both of these ball mounts come with a pin and...
  view full answer...


• Should Trailer Be Disconnected When Measuring Ball Mount Height
• You are correct, you will want to measure for the ball mount without the trailer in place because you will want to measure for the ball mount while the truck is at the natural suspension height. The tongue weight from the trailer and any load behind the rear axle in the vehicle may create sag. If this is the case you may want to look into a weight distribution system. If you determine you do need a weight distribution system for your truck and trailer just let me know your trailer tongue...
  view full answer...


• How Can I Avoid Clearance Issues With a T@B Nucamp 400 Tear Trailer and a 2001 Jeep Grand Cherokee
• I may have a solution to the potential clearance issue with your 2021 Jeep Grand Cherokee and the T@B Nucamp 400 Tear Trailer. The solution is an extended ball like the Brophy Ball Mount - 3" Rise, 4" Drop - 14-5/8" Long - Aluminum - 8,000 lbs # EA40. An extended ball mount will give you extra room between your vehicle and trailer. I have attached a link to the extended ball mounts that we offer. You will need a pin to attach the ball mount to your hitch, I recommend the Anti-Rattle Trailer...
  view full answer...


• Will Ball Mount Included with Curt Class II Hitch # C121073 Place Trailer Ball at Proper Height
• The ball mount recommended with the Curt Class II hitch # C12107, when installed in the rise position will place the base of the trailer ball at approximately 13-5/8 inches above the ground. The ball mount is part # C45017. If 13-5/8 inches wouldn't be high enough to level your trailer, you can measure the height above the ground of the bottom of the coupler when the trailer is level. Take a look at the FAQ article I've linked for you. The article shows exactly how to measure to determine...
  view full answer...


• Tri-Ball Mount with Black Hitch Balls for 2 Inch Receiver
• The Pro Series Tri-Ball Mount for 2" Hitches - 1-7/8", 2", 2-5/16" Balls - Black # PS80425 will not work with the Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900. The adjustable 3-ball mounts we carry such as the aforementioned Curt each have chrome hitch balls. For a tri-ball mount with black hitch balls there are fixed mounts such as the Pro Series or B&W Triple Tow # BWBMTT31004. I have added links to video reviews of both ball mounts for you to check out and I...
  view full answer...


• How To Select A Ball Mount For Towing A Trailer
• When you want to find out what ball mount works best for you the first thing you need to do is park both the trailer and the towing vehicle on level ground. You then need to measure the distance from the top of the trailer hitch receiver opening to the ground. Then measure the distance from the bottom of the trailer coupler to the ground. If the height of the hitch is greater you need a ball mount with a drop. If the coupler height is greater you need a ball mount with a rise. I have...
  view full answer...


• Adjustable Trailer Hitch Ball Mount With Multiple Hitch Balls
• The dual ball adjustable mounts we offer that have the 14-inch drop you asked about have 2-inch and 2-5/16 inch hitch balls. The closest option we have that may work for you is the Convert-a-Ball Adjustable-Height Ball Mount, part # TK5007. This adjustable mount has up to a 10-inch drop and 9-inch rise. This mount does not have a dual ball system but you can purchase a hitch ball system like part # 900B. The # 900B features one shank that is installed in the ball mount and has three...
  view full answer...


• Can Hole Be Drilled In Top Of Curt Multipurpose Ball Mount For Hitch Ball
• There are a couple reasons you cannot drill a hole in the Curt Multipurpose Ball Mount, part # D210. First, you would void any warranty for the mount and probably the accessory you want to use with the ball mounted in the # D210. Secondly, the top receiver opening is not designed for a hitch ball. It is made to be used with an accessory like a cargo carrier or a bike carrier. The bottom hitch ball mount is the only part of the item that is designed to be used with a trailer. I have attached...
  view full answer...


• I Need Help Identifying A Specific Ball Mount. Can You Help?
• That is a ball mount for a stealth hitch brand trailer hitch, with what is likely a 1-7/8" or 2" trailer ball. You can replace the ball mount with part # 391BMU7S. For a 1-7/8" trailer ball you can use part # A-80, or part # A-82 for a 2" ball.
  view full answer...


• How To Determine Which Ball Mount To Choose
• We have a very wide variety of ball mounts to choose from. Finding the correct one will depend on a few things though. First you will need to know the distance from the ground to the top of the inside of the trailer hitch once installed. Next, you will then need to measure from the ground to the bottom of the trailer coupler when on as even a surface as possible. The difference will tell you how much drop or rise you will need. As an example, if the trailer hitch measures 12" and the...
  view full answer...


• Solution for Ball Mount to Move Trailer up Steep Driveway
• The best solution would for a ball mount to help you move your trailer up a steel driveway would be one with a good amount of rise. An adjustable ball mount would be the best for this, something like the Curt Channel Style Adjustable Ball Mount - 5-1/4" Rise, 6-3/4" Drop # C45901. I'm not sure what rise or drop you use now, but this would give you some additional rise and allow you to use the rise or drop you need for normal towing circumstances. For a hitch ball, depending on your trailer's...
  view full answer...


• How to Determine Which Ball Mount to Choose
• The ball mount you need will depend on several factors, including the height of the trailer hitch, the height of the trailer coupler when the trailer is level and how heavy the trailer is. As a first step, you'll need to determine the rise or drop you'l need. Simply measure from the inside top of the receiver tube to the ground. Then with the trailer level, measure from the bottom edge of the coupler to the ground. The height difference is the rise or drop. If the hitch is taller, you'll...
  view full answer...


• How To Select Adjustable Ball Mount for 2-1/2-Inch Hitch on 2021 Ram 2500
• What I think you are asking, when you state correct height, is height of the ball mount on your 2021 Ram 2500. To choose the best adjustable ball mount for you need to determine the tallest rise and deepest drop you'll need. This will be the minimum range you'll need in your ball mount. Because you will be hauling different trailers I suggest you get an adjustable. Step 1 is to find your hitch height. You've done this and have identified 25". Next you will need to discover your coupler...
  view full answer...